We can help our customers with magnetic separation of metals from inert construction and demolition debris.
The simple magnetic blocks are used to remove small amounts of iron from material transported on a belt.
If there is a large amount of ferrous particles in the material being treated, then an overband magnetics separator is the most effective. The separator is suspended above the conveyor on which the material being treated moves. Unlike magnetic blocks, the magnet is constantly cleaned by a belt that rotates around the magnet.
For mobile crushing and screening units we produce suspended separators with magnetic system with extra strong neodymium magnets, The whole separator is dimensionally smaller and lighter.
At the ends of the conveyor belts, where the separation of magnetic and non-magnetic material also takes place, magnetic headrollers are installed as drive.
Drum magnetic separators are used for the removal of ferrous objects in the vertical pipeline paths.
Magnetic separators can be suitably combined with metal detectors. These devices react to all types of metals and can also reliably locate metal particles coated with other materials. They also help with the protection of the crushing equipment.
The variations of the use of magnetic metal separation in the recycling of demolition and construction waste are numerous, depending on the specific application. We will be happy to help you with the design.
If you have any question concerning the magnetic separation or inquiry please contact us.