News

Magnetic separation on POWTECH - TECHNOPHARM 2025 | stand 12-244

14. 8. 2025

Our colleagues from Goudsmit Magnetics will be happy to welcome you at booth 12-244 at the international trade fair POWTECH – TECHNOPHARM from September 23 to 25, 2025 in Nuremberg. This trade fair will showcase the latest trends and technologies in the processing, analysis, handling, transport of powdered, granulated and bulk materials.

Complete article

Extension of quality management system certificate

18. 7. 2025

It is one thing to obtain ISO certification, it is another to maintain and improve quality for the next period. In June, WAMAG conducted a certification audit of the quality management system according to ČSN EN ISO 9001:2015. We passed the audit successfully again and the certification was extended for another 3 years.

Complete article

Metal separation in dusty operation of wood recycling

9. 6. 2025

For dusty operation of wood recycling plant we designed and produced this dusty-tight overbelt permanent magnetic separator fitted with ATEX sensors. It is fully covered to protect against a lot of wood dust.

Complete article

Invitation to CFIA 2025 Trade Fair

6. 3. 2023

The CFIA trade fair for food technology will take place in Rennes (France) from 4 to 6 March 2025. The latest developments in magnetic separation solutions for the food industry can be seen at the stand of our French colleagues from Goudsmit Magnetics. Visit them in hall 5, stand D36.E35.

Complete article

Extension of production quality certification acc. to ATEX 2014/34/EU

19. 2. 2025

We have successfully passed the audit to extend the validity of the certificate of the production quality system according to the ATEX Directive 2014/34/EU. We can therefore continue to solute magnetic metal separation applications in dust explosion hazardous environments and design and manufacture magnetic separators for these challenging environments.

Complete article

Ultra powerful overband permanent magnetic separator protects the crusher

24. 1. 2025

Our ultra powerful overband permanent magnetic separator is shipped to the customer. It is intended for protection of the crusher against destruction by unwanted metal parts. It will be installed above 1 600 mm wide conveyor belt with a material flow of approximately 300 mm layer height. It is our flagship of overband permanent magnetic separators.

Complete article

Successful presentation at SYMAS 2024 | Krakow

2. 12. 2024

Together with our partner MATYKIEWICZ.COM, we participated as a co-exhibitor at the SYMAS® international trade fair in Krakow, Poland, in October. We are pleased to have attracted a large number of visitors, who were introduced to our latest developments in magnetic separation solutions for metal particles from powder and bulk raw materials. The sample of small N0 overband permanent magnetic separator was much appreciated.

Complete article

Christmas and New Year Holiday 2024/2025

13. 12. 2024

Our company will use the Christmas time as an opportunity to relax from December 23rd 2024 to January 3rd 2025. Do not hesitate to contact us at info@wamag.cz during this time. We will check inquiries or orders and we will solve it immediatelly after January 5th 2025. We wish you a Merry Christmas and a Happy New Year!

Complete article

Invitation for EuroBLECH 2024 Trade Fair

24. 9. 2024

From 22 to 25 October 2024, the international trade fair EuroBLECH will take place in Hannover, Germany. Our colleagues from partner company Goudsmit Magnetics will be pleased to welcome you in Hall 12, Stand B145. They will show you the latest developments in the field of magnetic sheet metal handling with magnetic sheet separator and magnetic grippers.

Complete article

Invitation to SYMAS 2024 | Krakow

16. 8. 2024

With our partner MATYKIEWICZ.COM we will participate as a co-exhibitor at the SYMAS® international trade fair in Krakow, Poland. On 16th and 17th October 2024, visit stand B20 to see our latest developments in magnetic separation solutions for unwanted metal impurities from powder and bulk raw materials.

Complete article

New Head of Sales

16. 7. 2024

From 1 July, Václav Pikora, Head of Design and Development, also became Head of Sales. This interconnection was a logical step, as the two departments work together on a daily basis and the results of their work are closely linked.

Complete article

WAMAG is celebrating 30 years

30. 5. 2024

30 years ago the WAMAG story began. Thanks to all our customers for their trust. Thanks to all employes that worked for WAMAG during that time for their professional aproach.

Complete article

Invitation to IFAT 2024

26. 4. 2024

The new concept of a three-stage magnetic metal separator for plastics recycling and its user benefits will be presented by our colleagues from Goudsmit Magnetics at the IFAT world's leading trade fair for water, sewage, waste and raw materials management in Munich from 13 to 17 May 2024 (booth B6 316).

Complete article

Magnetic separation on Waste to Energy conference 2024

8. 4. 2024

We supported this year's Waste to Energy conference as a partner. We followed up on last year's presentation of our solution for separating valuable non-ferrous metals such as aluminium or copper in slag after incineration of municipal waste, which does not have to end up in landfill. We have a solution and the customer then economically recovers his waste and lightens the burden on nature.

Complete article

New drum magnetic separator for the treatment of RDF & SRF wastes

3. 2. 2024

Another innovation from our engineering. New, extra deep field, drum magnetic separator for the treatment of RDF & SRF wastes and other big loads of bulk material. What advantages this new type brings for end users? Read more.

Complete article

Magnetic separation on CFIA and Anuga FoodTec trade fairs 2024

31. 1. 2024

Development and innovation are the driving forces behind the international Goudsmit Magnetics Group. Innovations in our magnetic systems, such as the compact pipe magnet with a magnetic induction of 12,000 gauss, which help with the separation of unwanted metal particles from bulk and granular materials in food, feed and other industries, will be presented at the spring Anuga Foodtec and CFIA trade fairs. Come and visit us.

Complete article

New permanent high intensity separator | 12 000 Gauss

23. 10. 2023

We designed and delivered a new version of the permanent high intensity belt separator (PVPS) to a customer in the food industry. Its special feature is the certification of the belt for food contact and at the same time the modification of the whole machine for use in explosive environments.

Complete article

Magnetic handling on Blechexpo 2023

3. 10. 2023

News - the electrically switched magnetic E-gripper, which doesn't require compressed air, will be presented from November 7 to 10, 2023, at the international trade fair for metalworking technology Blechexpo in Stuttgart. Visit our partner Goudsmit Magnetics' booth in Hall 3, Booth 3302. You'll see the E-gripper in action and have the opportunity to explore other sheet metal magnetic handling solutions.

Complete article

Magnetic separation on POWTECH 2023

31. 8. 2023

Need to remove unwanted metal particles from bulk, powdered materials or liquids? You can see our magnetic systems for separation and filtration of ferromagnetic metals during the international POWTECH trade fair 26. - 28. 9. 2023 in Nuremberg. New extra strong 10 000 gauss rotary cleanflow magnet will be possible to see on booth 1-358 of our partner Goudsmit Magnetics.

Complete article

We painted production halls

21. 8. 2023

We used the warm summer days to paint the production halls. The clean white walls and ceilings brightened up the large spaces and improved visibility and thus work safety. They also brought a more pleasant feeling during the demanding physical work of our colleagues in the welding shop and the final assembly of our magnetic separators.

Complete article

Magdaléna, o.p.s. in WAMAG

26. 7. 2023

We were glad that we could host Petra Čermáková and Šárka Slavíková Klímová from company Magdaléna, o.p.s here at WAMAG.

Complete article

In Mníšek, we were the best packaging waste sorters

12. 7. 2023

Mníšek pod Brdy has the best system of collecting and sorting packaging waste in the Czech Republic. It was the winner of the 19th annual competition for the "Crystal dustbin". We are glad that we also contributed. We sort at WAMAG and in the homes of employees who live in Mníšek pod Brdy. Subsequently our magnetic separators help with the metal recovery and recycling on the sorting lines.

Complete article

WAMAG on Expo Lesní lom 2023

23. 6. 2023

Last week, the 13th International Demonstration Trade Fair for Mining, Processing, and Construction Equipment took place in the authentic environment of the quarry - Expo Lesní lom 2023. Our colleagues Petr and Jan visited the fair, and we were pleased to find that our overbelt permanent magnetic separator was possible to see on the mobile crusher.

Complete article

The Primary School students excursion

26. 5. 2023

We continue in the tradition of excursions for students. On Thursday, 26th May, we welcomed the first group of 9th grade students from the Primary School in Mníšek pod Brdy. It is important for us to let the young generation know that there is an engineering company in their area that helps customers from different parts of the world to solve varied problems with metal separation by using magnetism. We believe to encourage the students' interest in technical branches and working in engineering sector.

Complete article

7/4 and 10/4/2023 - we are out of office - bank holiday

5. 4. 2023

We wish you a Happy Easter. On 7 April and 10 April 2023 we are closed due to public holidays in the Czech Republic. Thank you for your understanding. If necessary please send your request to info@wamag.cz.

Complete article

CFIA 2023 Trade Fair

6. 3. 2023

The CFIA trade fair for food technology will take place in Rennes (France) from 14 to 16 March 2023. The latest developments in magnetic separation solutions for the food industry can be seen at the stand of our French colleagues from Goudsmit Magnetics. Visit them in hall 5, stand D35.E35.

Complete article

We supported

22. 12. 2022

During the year, we supported several local organizations that help people and where help is needed - Magdaléna, o. p. s., Private Children's Home SOS 92, z.ú. Dobříš, Charity Starý Knín and People in Need-Project SOS Ukraine, Remobil and Mníšek pod Brdy Municipal Library.

Complete article

Recycling 2022 Trade Fair

11. 11. 2022

Our partner Goudsmit Magnetics will participate in the national Recycling exhibition in Gorinchem (NL) from 15 to 17 November. The exhibition is focused on recycling technologies. The main focus of stand F120 will be a new range of neodymium overband separators suitable for mobile crushing units. The development of the new range was carried out at WAMAG, where we are responsible for the development and production of overband magnetic separators for the entire international Goudsmit Magnetics group.

Complete article

Invitation for EuroBLECH 2022 Trade Fair

17. 10. 2022

From 25 to 28 October 2022, the international trade fair EuroBLECH will take place in Hannover, Germany. Our colleagues from partner company Goudsmit Magnetics will be pleased to welcome you in Hall 12, Stand B153. They will show you the latest developments in the field of magnetic sheet metal handling with magnetic sheet separator and magnetic grippers.

Complete article

Invitation for POWTECH 2022 Trade Fair

31. 8. 2022

Need to remove unwanted metal particles from bulk, powdered materials or liquids? You can see our magnetic systems for the separation and filtration of ferromagnetic metals at the international POWTECH trade fair in Nuremberg. Visit booth 3-634 of our partner Goudsmit Magnetics. We will be glad to show you the machines and discuss your technological needs and applications.

Complete article

Investment in Modernization of Production Technology

26. 8. 2022

Another high-performance CNC lathe has been added to our machine park. The significant investment in the modernization of production technology will make production more efficient, shorten the time and increase the seriality. It also benefits the further refinement of turned parts, whose precise design contributes to the high quality of our magnetic separators. The work of the machine shop staff is also more comfortable.

Complete article

Demolition and Construction Waste - Source of Raw Materials for Construction

18. 7. 2022

The shortage of natural materials in the construction industry can be addressed to some extent by consistent recycling of inert construction and demolition waste. In addition, magnetic separation of the crushed material yields ferrous and non-ferrous metals that can be reused and saves natural resources.

Complete article

25 years together WAMAG and Goudsmit Magnetics

3. 7. 2022

On July 3, 1997 we officially started cooperation with our Dutch partner Goudsmit Magnetics. For twenty-five years, we have been sharing know-how, exchanging business experiences and supplying customers worldwide with leading-edge solutions for the separation of ferrous and non-ferrous metals. It is not only our passion for magnetism that unites us.

Complete article

Limitation of production during summer vacation

13. 6. 2022

From 25. 7. to 5. 8. 2022 the production and operation of our company will be limited due to summer vacations. Thank you for your understanding. If necessary send us the e-mail to info@wamag.cz. We wish you a nice summer.

Complete article

Invitation for automatica 2022 Trade Fair

19. 6. 2022

Our colleagues from the Goudsmit Magnetics will present modified palletising magnet on the automatica 2022 trade fair in Munich on June 21 - 24 (Hall A6, Booth 226). Automatica is the world's leading automation and robotics trade fair. Visitors can see a wide range of robots, mounting systems, machine vision systems and other components.

Complete article

Invitation to IFAT 2022

21. 4. 2022

The new permanent overband separator with a three-pole magnetic system made from strong neodymium magnets and its user benefits will be presented by our colleagues from Goudsmit Magnetics at the IFAT world's leading trade fair for water, sewage, waste and raw materials management in Munich from 30 May to 3 June 2022 (stand B6 316).

Complete article

Production quality certification acc. to ATEX 2014/34/EU

7. 3. 2022

We have successfully certified our production quality system according to ATEX Directive 2014/34/EU. If you need to solve magnetic separation in a dust explosion hazardous environment, we will design and manufacture a suitable magnetic separator for you. With ATEX certification for ZONE 21, we already have a certified range of suspended permanent magnetic separators.

Complete article

The power of magnets and people - 27 years already

27. 10. 2020

On May 30, 1994, the history of WAMAG began to be written. We have been developing and manufacturing magnetic separators and filters for 27 years. We have also been cooperating with the Dutch partner Goudsmit Magnetics for 24 years. Thanks to our know-how and innovations, we offer customers around the world top solutions for the separation of ferrous and non-ferrous metals using the invisible force of magnetism.

Complete article

Magnetic conveyors for inter-operational transport

5. 3. 2021

Three new magnetic conveyors will help with the inter-operational transport of metal scraps from punch presses. We have designed and manufactured these new custom-made conveyors to replace the current ones, which no longer fulfilled the technical requirements. The length of two straight conveyors is almost 9 meters. The third magnetic conveyor, type "SWAN NECK", has a transport length of 4,7 meters. The capacity of the conveyors is 60 kg/min. Take a look at the details and photos from the dispatching of the conveyors.

Complete article

Educational modules in WAMAG - 2021

1. 2. 2021

At the end of last year we were granted a subsidy for education. It includes two modules. The first one is for our design engineers who focus on advanced features of Vault and Inventor systems. The second module is intended for other administrative workers and will be used for engineering technologies and technical documentation in mechanical engineering.

Complete article

Christmas and New Year Holiday 2020/2021

14. 12. 2020

Our company will use the Christmas time as an opportunity to relax from December 24th 2020 to January 4th 2021. We will check inquiries or orders and process them as needed. Do not hesitate to contact us at info@wamag.cz during this time.

Complete article

Automated measurement of magnetic field

12. 6. 2020

More precise and detailed measuring of the magnetic system characteristics of the overband magnetic separators. That is the main benefit of the device for the automated measurement of the magnetic fields which was developed by our inventive engineering. See more information in the details.

Complete article

New corporate website of Goudsmit Magnetics group

2. 6. 2020

The new corporate website of the Goudsmit Magnetics group is online. It brings the latest technical information on magnetic systems for our solutions for recycling, metal separation, magnetic manipulation, demagnetization.

Complete article

Permanent overbelt separators for ATEX zone 21.

4. 5. 2020

We have extended the possibilities of use of permanent overbelt separators and we have certified them in accordance with the European directive ATEX 2014/34/EU. We are able to manufacture the separators also in ATEX version for the use in a potentially explosive atmosphere with dust - ATEX zone 21.

Complete article

16. 03. 2020 - nationwide quarantine in CZ - WAMAG is working

16. 3. 2020

From 16. 3. 2020 a nationwide quarantine was declared in the Czech Republic to slow down the spread of COVID-19 desease. WAMAG keeps functioning as normal. Part of our employees work from home. Work flexibity is our great advantage, therefore we have adapted to new non-standard conditions very quickly.

Complete article

From 12. 03. 2020 - the state of emergency measures in Czech Republic

13. 3. 2020

Let us inform you about the state of emergency measures in Czech Republic from March 12, 2020. The goods can be distributed across borders. There are restriction for people movement mainly. Please follow Details for more information and link to official statement. Thank you.

Complete article

Quality Management in Accordance with ISO 9001:2015

27. 8. 2019

By implementing a system of quality management in accordance with ISO 9001:2015, we have made yet another step towards improving the quality of our products and services. In June, we have successfully passed the certification audit and acquired the certificate.

Complete article

Goudsmit Magnetics with new corporate identity

2. 7. 2019

At the end of May, our partner, magnet manufacturer Goudsmit Magnetics introduced a completely new corporate identity. This change takes place in the year that Goudsmit celebrates its 60th jubilee, which seemed the perfect occasion to adopt a streamlined, more contemporary look.

Complete article

Eddy Current Separator Locust

8. 8. 2018

The Eddy Current separator (or the EC separator) has an irreplaceable function in recycling valuable materials such as copper, aluminium or brass. The LOCUST machine represents the newest addition to our range of Eddy Current separators with a number of design and technological improvements.

Complete article

Invitation for automatica 2018 trade fair

17. 6. 2018

Our colleagues from the Goudsmit Magnetics Group will take part in the automatica 2018 trade fair in Munich (Hall 6, Stand 230) on June 19 - 22. Automatica is the world's leading automation and robotics trade fair. Visitors can see a wide range of robots, mounting systems, machine vision systems and other components.

Complete article

Industrial Design in Recycling

Can you imagine what role design plays in the field of recycling technologies? Companies trading on foreign markets feel the need to offer unique and recognisable products. It is modern design that allows individual manufacturers to differentiate themselves and gain a competitive advantage.

Complete article

Separation of Iron from Biomass

Overband magnetic separator for ATEX 21/22 environments with risk of dust explosion. Suitable for removing ferrous particles from a stream of recycled materials and during bulk transport of loose materials or biomass such as wood, communal waste or alternate solid recovered fuels (energy production).

Complete article